HD/SD Multi Viewer (Quad Viewer)

Ajouter article au devis


 Le MV 42-HS est une mosaïque 4 entrées HD/SD SDI sur un simple écran avec visionnage des niveaux audio.


Video Input

4 inputs in the following video formats (Mixed input, asynchronous acceptable)

HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps 75Ω BNC, Color format: YCbCr (4:2:2), Quantization: 10-bit

SD-SDI: 270 Mbps 75Ω BNC, Color format: YCbCr (4:2:2), Quantization: 10-bit

Video Format

1080/60i, 1080/59.94i, 1080/50i, 1080/30p, 1080/30PsF, 1080/29.97p, 1080/25p, 1080/25PsF, 1080/24p, 1080/24PsF, 1080/23.98p, 1080/23.98PsF, 720/60p, 720/59.94p, 720/50p, 720/24p, 720/23.98p, 525/60 (NTSC), 625/50 (PAL)

Video Output

HD-SDI: 1 output, 1.485 Gbps or 1.485/1.001 Gbps 75Ω BNC, Color format: YCbCr (4:2:2), Quantization: 10-bit * Embedded audio is unsupported

DVI-D: 1 output, DVI-D connector, Color format: RGB, Quantization: 8-bit * HDCP is unsupported

Output Video Format

1080/59.94i, 1080/50i, 720/59.94p, 720/50p
* No input/output frame rate converter. Frame rate difference between input and output may result in the repeat frame or drop frame.

I/O Delay

Max. 1.5 frames

Screen Display

Full screen, 2-split screen, Quad screen

Audio Level Metering

Audio level metering for HD/SD-SDI input signal embedded audios (Up to 8 channels)

Time Code Display

Embedded time code display for HD/SD-SDI signals

Title Display

Max.16 characters x 1 line for each input channel, Character types: Alphanumeric characters and symbols

Data Backup

Stores the setting data to EEPROM


RS-232C: 9-pin D-sub (male) x 1 Baud rate: 38,400 bps, data length: 8-bit, stop bit: 1-bit, Parity: NONE


0ºC to 40ºC / 30% to 90% (no condensation)


12 V DC (DC jack) *AC adaptor can be separately purchased.

Power Consumption

22 VA (12 W) (at 100 V), 23 VA (11 W) (at 200 V)


212 (W) x 44 (H) x 161 (D) mm / 1.25 kg


Operation manual


AC Adapter, Rack mount bracket set

  • Support for mixed input of HD-SDI and SD-SDI signals (Mixed and asynchronous input supported)
  • Support for mixed input of analog composite (option)
  • Audio level metering for HD/SD-SDI embedded audio signals (Up to 8 channels display)
  • HD-SDI and DVI-D (1920 x 1080 or 1280 x 720) high definition image output
  • Full screen, 2-split (right and left), and quad screen output selectable
  • Video loss detection
  • Display of ancillary time code (ATC) embedded on HD/SD-SDI input signals
  • Title display of up to 16 characters for each input (alphanumeric and symbol)
  • With the interface option, genlock input, color selectable (red and green) tally indicator display, remote control via LAN, and date/time display can also be supported


  • MV-42AI (Analog Composite Input Card Option)

Video Input

Analog composite: 1.0 Vp-p 75Ω BNC x 4
(Analog composite or SDI input selectable for each input using the menu)
Color format: YCbCr (4:2:2)
Quantization: 8-bit

Video Format


MV-42IF (Interface Card Option)

Genlock Input

75Ω BNC x 1 BB: NTSC 0.429 Vp-p/PAL 0.45 Vp-p, Tri: 0.6 Vp-p

LTC Input

75Ω BNC x 1 SMPTE time code: 1.0 Vp-p within ±6 dB


9-pin D-sub female: Up to 8 inputs
Red/green tally inputs CHs 1-4 (negative logic level signal or make contact)
Full screen switching, full screen display, multi channel screen display, time correction, alarm reset ?negative logic pulse signal or make contact?

Date/Time Display

Internal clock or LTC time code input


10BASE-T/100BASE-TX, RJ-45 (Category 5) x 1